主要规格及技术指标

"Technical Parameters:
1. Number of syringes: 3
2. Drive mode: each syringe is driven by a stepping motor
3. Minimum dead time: 0.6 milliseconds (FC-08 pool) 0.25 milliseconds (micro pool)
4. Injection flow range: 0.01-10ml/s (depending on the installed syringe)
5. Mixing ratio range: 1/1 to 1/100 continuously adjustable
main feature:
1. Constant temperature water jacket design, full computer control operation
2. Program-controlled drive syringe, the flow of each sample is adjustable, independent of concentration and viscosity
3. High precision, fully adjustable mixing and dilution ratio
4. Very short dead time, up to 0.25 milliseconds
5. Two-way, three-way and four-way flow injection stop flow device can be selected
技术参数：
1.注射器数量：3个
2.驱动方式：每一个注射器由一个步进马达驱动
3.最小死时间：0.6毫秒（FC-08池）0.25毫秒（微量池）
4.注射流量范围：0.01-10ml/s(取决于安装的注射器）
5.混合比例范围：1/1至1/100连续可调
主要特点：
1.恒温水夹套设计，全电脑控制操作
2.程控驱动注射器，每路样品流量可调，不受浓度与粘度影响
3.高精度，完全可调的混合与稀释比例
4.极短的死时间，可达0.25毫秒
5.二路、三路、四路流动注射停流装置可选择"

主要功能及特色

Biologic's fast-kinetic stop-flow device and spectrometer cooperate with the spectrometer to perform instantaneous real-time recording of fast dynamics, or offline analysis, providing a powerful weapon for the majority of fast-dynamic research scholars. Choose different configurations for the following applications:
* Protein Folding
* Enzyme Kinetice
* Substrate Binding
* Conformational Changes
* Substrate Transport in Vesicles
* Second Messenger Studies
* Fast chemical reaction kinetics
Biologic（比奥罗杰）公司生产的快速动力学停流装置与光谱仪器配合进行快速动力学瞬间实时记录，或离线分析，为广大的快速动力学研究学者提供了有力的武器。选择不同的配置可进行下列应用：
* 蛋白质折叠动力学
* 酶动力学
* 底物结合
* 构象转变
* 胞内底物运输
* 第二信使研究
* 快速化学反应动力学

主要附件及配置

快速动力学装置

SFM-3000：第三代停流系统，支持步进马达独立控制注射器，混合比例可在1:1至1:100间连续调整，无需更换硬件。具有极低的死体积（低至88 μL）和死时间（200 μs），适用于蛋白质折叠、酶动力学等快速反应研究。

快速混合功能：支持温度突变模式（如升温或降温混合）、化学淬灭、光学淬灭和冷冻淬灭等，适应不同反应条件需求。

光谱检测单元
紫外-可见（UV-Vis）检测模块：覆盖190–600 nm波长范围，适用于吸光度变化的实时监测，例如蛋白质构象变化或金属络合物反应分析。
荧光检测模块：配备高灵敏度光探测器（如光电倍增管或硅光电二极管），结合光学滤光片（如带通滤光片）增强信噪比，适用于荧光标记生物分子（如DNA/RNA结合反应）的检测。

温度控制系统
温控模块：支持快速混合温度突变（如从室温到低温的骤变），集成智能温控算法，确保反应体系温度的精确控制。
Rapid Kinetic Stopped-Flow Device

SFM-3000: Third-generation stopped-flow system, featuring stepper motor-driven independent control of syringes. Continuously adjustable mixing ratio from 1:1 to 1:100 without hardware replacement. Ultra-low dead volume (down to 88 μL) and dead time (200 μs), suitable for rapid reaction studies such as protein folding and enzyme kinetics.

Rapid Mixing Functions: Supports temperature jump modes (e.g., heating or cooling during mixing), chemical quenching, optical quenching, and cryogenic quenching to meet diverse reaction condition requirements.

Spectroscopic Detection Unit

UV-Vis Detection Module: Covers a wavelength range of 190–600 nm, enabling real-time monitoring of absorbance changes (e.g., protein conformational changes or metal complex reactions).

Fluorescence Detection Module: Equipped with high-sensitivity photodetectors (e.g., photomultiplier tubes (PMT) or silicon photodiodes (SPD)) and bandpass optical filters to enhance signal-to-noise ratio. Ideal for detecting fluorescence-labeled biomolecules (e.g., DNA/RNA binding interactions).

Temperature Control System

Thermostatic Control Module: Supports rapid temperature jumps during mixing (e.g., from ambient to low temperature), integrated with intelligent temperature algorithms for precise control of reaction conditions.