主要规格及技术指标

1. System pump
Precise automatic micro-plunger pump, each pump head has an independent degassing valve, and each pump has a lubrication path to lubricate the plunger bar of the pump to prolong the service life of the pump.
1.1. Flow rate: 0.01-25mL/min.
1.2. Pressure range: 0-5 MPa (50bar, 725 psi).
1.3. Flow rate repeatability: conditions: 0.25-25 mL/min, 0.7-3 cP.
1.4. Flow rate accuracy: ±2%, flow rate precision: RSD<0.5%.
2. Detector
2.1 Single wavelength detector
2.1.1 Use LED single UV light source (280nm) detection, no need to warm up, long service life.
2.1.2. Detection range: -6 to +6 AU, linearity: ±5% between 0-2 AU.
2.1.3 Withstand pressure range: 0-2MPa.
2.1.4. Separate design of light source and flow cell to avoid the influence of light source overheating on the sample, high accuracy of determination.
2.2 Conductivity detector
2.2.1 Detection range: 0.01-999.99 ms/cm.
2.2.2 Conductivity accuracy: ±0.01mS/cm or ±2% (in 0.3-300 ms/cm).
2.3 Thermodetector: 0-70℃，accuracy：±1.5℃（between 4℃and 35℃）
2.4 pH detector： precision±0.1（temperature compensation）.
2.5 Pressure sensor detection range：0-5 MPa (50bar, 725 psi).
3. Valve
Number of valves: up to 7, standard configuration with inlet valve, injection valve and outlet valve.
4. Collector
4.1 Round collector，Up to 175 samples will be collected, with a collection volume of 0.1 to 50 mL.
4.2 Flow path material: PEEK inert material.

1 .系统泵
精确的全自动微量柱塞泵，每个泵头都有独立除气阀,每个泵后都有润洗通路，润洗泵的柱塞杠，延长泵的使用寿命。
1.1.流速：0.01-25mL/min。
1.2.压力范围：0–5 MPa (50bar，725 psi)。
1.3.流速重复性：条件：0.25–25 mL/min, 0.7–3 cP。
1.4 流速准确度：±2%，流速精度：RSD<0.5%。
2. 检测器
2.1 单波长检测器
2.1.1.使用LED单一紫外光源（280nm）检测，无需预热，使用寿命长。
2.1.2.检测范围：-6 到 +6 AU，线性：±5%，在0–2 AU之间。
2.1.3耐受压力：0-2MPa。
2.1.4.光源和流动池分开设计，避免光源过热对样品的影响，测定准确度高。
2.2 电导检测器
2.2.1检测范围：0.01－999.99 ms/cm。
2.2.2 电导精确度：±0.01mS/cm或±2%（在0.3-300 ms/cm）。
2.3 温度监测器：0-70℃，准确度：±1.5℃（在4℃-35℃之间）。
2.4 pH检测器：精度±0.1（温度补偿）。
2.5 压力传感器检测范围：0–5 MPa (50bar，725 psi)。
3. 阀门
阀门数量：最多7个，标配：入口阀、进样阀、出口阀。
4. 收集器
4.1 圆形组分收集器，最多收集数量175个，收集体积0.1-50 mL。
4.2 流路：PEEK惰性材料。

主要功能及特色

1. AKTA go system is a compact liquid chromatography system that allows researchers to perform routine protein purification with ease and efficient use of bench and cold cabinet space.
2. The robust and reliable system hardware and UNICORN™ control software are designed to work together with our prepacked columns and chromatography resins for efficient and successful protein purification.
3. Intuitive method creation in minutes and interactive process picture for maximum control and easy access to manual controls even during method runs.
4. The system has a modular design with all valves, monitors, and columns mounted on the front, wet side of the system. This allows for easy interaction with all instrument modules.
5. The system flow path is designed to minimize band-broadening effects and to enable high-resolution protein separation. All wetted materials used in the flow path are biocompatible and resistant to commonly used buffers.
6. AKTA go system is fully supported by UNICORN software and gives you real-time control of your chromatography system. Automated methods can be created in minutes for most common chromatography techniques using preprogrammed methods. UNICORN software also supports evaluation of results.

1. AKTA go 是一款小巧紧凑的液相层析系统，研究人员可以使用它轻松进行常规蛋白质纯化，同时有效利用工作台和冷柜空间。
2. AKTA go稳健可靠的系统硬件和 UNICORNTM 控制软件旨在与预装柱和层析填料配合使用，使整个蛋白纯化过程更加高效和成功。
3. 在数分钟内即可直观地完成方法创建，流程图采用交互式设计，实现最大限度的控制仪器，即使在方法运行期间也能轻松访问手动控制。
4. 该系统采用模块化设计，所有的阀门、监测器和层析柱均安装在系统的前部湿侧。该设计允许操作者与仪器的所有模块轻松交互。
5. 系统流路的设计旨在最大限度地减少带宽效应，实现高分辨率的蛋白质分离。流路中使用的所有润湿材料均具有生物相容性，并能耐受常用的缓冲液。
6. UNICORN 软件可完整支持 AKTA go，为您提供层析系统的实时控制。使用预编程的方法，可以在几分钟内为最常见的层析技术创建自动化方法。 UNICORN 还支持结果分析。

主要附件及配置

500 μL进样环型号： 29383015
5mL进样环型号：18114053
圆形收集器型号：29011362
层析柜品牌：英诺科 型号：IT-CX-1000
500 μL sample loop model：29383015
5mL sample loop model：18114053
Round collector Model ：29011362
Chromatography Brand: Innotech，Model: IT-CX-1000