主要规格及技术指标

2位3通按键式手动阀，常闭： 结构：座阀, 直动式, 弹簧复位
压力范围：0-800 kPa (0-8 bar)
额定流量：1 (p)→2 (A)60 l/min
2位3通按键式手动阀，常开： 结构：座阀, 直动式, 弹簧复位
压力范围：0-800 kPa (0-8 bar)
额定流量：1 (p)→2 (A)60 l/min
2位5通旋钮式手动阀 结构：座阀, 直动式, 弹簧复位
压力范围：0…800 kPa (0…8 bar)
额定流量：1 (p)→2 (A)60 l/min
2位3通旋钮式手动阀，常闭 结构：座阀, 直动式, 弹簧复位
压力范围：0…800 kPa (0…8 bar)
额定流量：1 (p)→2 (A)60 l/min
2位3滚轮杠杆阀，常闭 结构：座阀, 直动式, 单向，弹簧复位
压力范围：0…800 kPa (0…8 bar)
额定流量：1 (p)→2 (A)60 l/min
磁性气动接近开关，带气缸连接件 显示：到位显示
压力范围：200…800kPa(2…8bar)
信号压力：同压力范围
流量1…2：最小40l/min
流量2…3：最小40l/min
延时阀，常闭 结构：直控式,弹簧复位
压力范围：2…600kPa(2bar…6bar)
额定流量1 (p)→2 (A)：50 l/min
额定流量2 (p)→3 (A)：75 l/min
压力顺序阀 结构：座阀,弹簧复位
工作压力:180…800kPa
(1.8…8bar)
控制压力范围: 100…800kpa
(1…8bar)
额定流量1 (p) →2 (A):100 l/min
2位3通单气控阀 结构：直控式,弹簧复位
工作压力范围：-0.9bar…10bar
控制压力范围：3bar…10bar
额定流量1 (p) →2 (A):500l/min
2位5通单气控阀 结构：直控式,弹簧复位
工作压力范围：-0.9bar…10bar
控制压力范围：3bar…10bar
额定流量1 (p) →2 (A):500l/min
2位5通换向阀，双气控，先导式 结构：直控式,双气控,优先主控信号
工作压力范围：-0.9bar…10bar
控制压力范围：2bar…10bar
额定流量1 (p) →2 (A) :500l/min
梭阀,或逻辑 结构：或门(梭阀)
压力范围：100…1000kPa
(1…10bar)
额定流量1,1/3…2 ：500l/min
双压阀,与逻辑 结构：与门(双压阀)
压力范围：100…1000kPa
(1…10bar)
额定流量1,1/3…2 ：500l/min
快速排气阀 结构：座阀
压力范围：50…1000kPa
(0.5…10bar)
额定流量1(p) →2(A)：300l/min
额定流量2(p) →3(A)：550l/min
单向节流阀 结构：节流阀
压力范围：0.3bar…10bar
流量
控制方向：0…180l/min
非控制方向：180/110l/min
(节流阀打开/关闭)
单作用气缸 结构：活塞式
最大工作压力：1000 kpa (10 bar)
最大行程：50 mm
600 kpa (6 bar)时推力：165 N
最小弹簧回程力：13.5 N
双作用气缸 结构：活塞式
最大工作压力：1000kpa (10 bar)
最大行程：100 mm
600 kpa (6 bar) 时推力 ：165 N
600 kpa (6 bar) 时回程推力 ：140 N
过滤、调压组件（二联件） 结构：带冷凝器的烧结过滤器，柱塞控制阀
额定流量：750 l/min
最大输入压力：1600 kpa (16 bar)
最大工作压力：1200 kpa (12 bar)
过滤等级：40цm
冷凝量：14 cm3
接头：G1/8，QS-6，用于气管PUN6×1
输入压力: 1000 kpa (10 bar),
工作压力: 600 kpa (6 bar),
压力波动: 100 kpa (1 bar)
减压阀，带表 额定流量：800 l/min
最大输入压力：1600 kpa (16 bar)
最大工作压力：1200 kpa (12 bar)
输入压力: 1000 kpa (10 bar),
工作压力:600 kpa (6 bar),
压力波动: 100 kpa (1 bar)
压力表 结构：管状弹簧
量程：0…1000kPa(0…10bar)
精度等级：1.6
分气块 接头：G 1/8
用于气管：PUN6×1
用于气管：PUN4×0.75
气管 外径 ：4mm
与流量相关的弯曲半径：17mm
内径：2.6mm
最小弯曲半径：8mm
和温度相关的工作压力：
-0.95…10bar
环境温度：-35 ... 60 °C


2/2-way manual valve with push button, normally closed: Structure: seat valve, direct acting, spring return
Pressure range: 0-800 kPa (0-8 bar)
Rated flow: 1 (p)→2 (A) 60 l/min
2/2-way push-button manual valve, normally open: Structure: seat valve, direct acting, spring return
Pressure range: 0-800 kPa (0-8 bar)
Rated flow: 1 (p)→2 (A) 60 l/min
2/5-way manual valve, rotary knob, Structure: seat valve, direct-acting, spring return
Pressure range: 0…800 kPa (0…8 bar)
Rated flow: 1 (p)→2 (A) 60 l/min
2/3-way manual valve, normally closed, knob-type Structure: seat valve, direct-acting, spring-return
Pressure range: 0…800 kPa (0…8 bar)
Rated flow: 1 (p)→2 (A) 60 l/min
2/3-way roller lever valve, normally closed Structure: seat valve, direct acting, non-return, spring return
Pressure range: 0…800 kPa (0…8 bar)
Rated flow: 1 (p)→2 (A) 60 l/min
Magnetic-pneumatic proximity switch with cylinder connection Display: position display
Pressure range: 200…800 kPa (2…8 bar)
Signal pressure: same as pressure range
Flow rate 1…2: min. 40 l/min
Flow 2…3: min. 40 l/min
Time-delay valve, normally closed Structure: direct-acting, spring-return
Pressure range: 2…600 kPa (2 bar…6 bar)
Rated flow 1 (p)→2 (A): 50 l/min
Rated flow 2 (p)→3 (A): 75 l/min
Pressure sequence valve: Structure: seat valve, spring return
Operating pressure: 180…800 kPa
(1.8…8bar)
Control pressure range: 100…800kpa
(1…8bar)
Rated flow 1 (p) → 2 (A): 100 l/min
2/3-way single-air control valve, direct-controlled, spring-return
Operating pressure range: -0.9 bar…10 bar
Control pressure range: 3 bar…10 bar
Rated flow 1 (p) →2 (A): 500 l/min
2/5-way single-air control valve Structure: direct control, spring return
Operating pressure range: -0.9 bar…10 bar
Control pressure range: 3 bar…10 bar
Rated flow 1 (p) →2 (A): 500 l/min
2/5-way directional valve, double-air-controlled, pilot-operated Structure: direct-controlled, double-air-controlled, priority to main control signal
Operating pressure range: -0.9 bar…10 bar
Control pressure range: 2 bar…10 bar
Rated flow 1 (p) → 2 (A): 500 l/min
shuttle valve, or logic Structure: OR gate (shuttle valve)
Pressure range: 100…1000 kPa
(1…10bar)
Rated flow 1,1/3…2: 500 l/min
Double pressure valve, AND logic Structure: AND gate (double pressure valve)
Pressure range: 100…1000kPa
(1…10bar)
Rated flow 1,1/3…2: 500 l/min
Quick exhaust valve Structure: seat valve
Pressure range: 50…1000kPa
(0.5…10bar)
Rated flow 1(p) → 2(A): 300 l/min
Rated flow 2(p) → 3(A): 550 l/min
One-way restrictor valve Structure: restrictor valve
Pressure range: 0.3 bar…10 bar
Flow rate
Control direction: 0…180l/min
Uncontrolled direction: 180/110l/min
(throttle open/throttle closed)
Single-acting cylinder Structure: piston type
Maximum operating pressure: 1000 kPa (10 bar)
Maximum stroke: 50 mm
Thrust force at 600 kPa (6 bar): 165 N
Minimum spring return force: 13.5 N
Double-acting cylinder Structure: piston type
Maximum operating pressure: 1000 kPa (10 bar)
Maximum stroke: 100 mm
Thrust force at 600 kPa (6 bar): 165 N
Return force at 600 kPa (6 bar): 140 N
Filter and pressure-regulating assembly (two-stage) Structure: sintered filter with condenser, plunger control valve
Rated flow: 750 l/min
Maximum input pressure: 1600 kPa (16 bar)
Maximum operating pressure: 1200 kPa (12 bar)
Filtration level: 40 cm
Condensate capacity: 14 cm3
Connector: G1/8, QS-6 for air hose PUN 6×1
Input pressure: 1000 kpa (10 bar),
operating pressure: 600 kpa (6 bar),
Pressure fluctuation: 100 kpa (1 bar)
Pressure reducing valve with gauge Nominal flow rate: 800 l/min
Maximum input pressure: 1600 kPa (16 bar)
Maximum operating pressure: 1200 kpa (12 bar)
Input pressure: 1000 kpa (10 bar),
operating pressure: 600 kPa (6 bar),
Pressure fluctuation: 100 kpa (1 bar)
Pressure gauge: Structure: tubular spring
Range: 0…1000 kPa (0…10 bar)
Accuracy class: 1.6
Gas distributor block Connector: G 1/8
for gas tubing: PUN 6×1
for air tube: PUN 4×0.75
Tube outer diameter: 4mm
Flow-related bending radius: 17mm
Internal diameter: 2.6mm
Minimum bending radius: 8mm
Operating pressure dependent on temperature:
-0.95…10 bar
Ambient temperature: -35 ... 60 °C

主要功能及特色

气动液压实训台将气、液、电集成为一体，以适应不同行业、不同培训层面对机电一体化教学需求的综合实训平台。 整个系统从教材到FluidSIM模拟软件，从单一内容的实验台到综合实验台，每个环节都相互关联，逐步提升。具有很好的通用性和互换性。

The pneumatic and hydraulic training platform integrates air, liquid and electricity into one, and is a comprehensive training platform that caters to the teaching needs of mechatronics in different industries and at different training levels. The entire system, from the teaching materials to the FluidSIM simulation software, from a single-content experiment bench to a comprehensive experiment bench, is interconnected and gradually improves. It has good versatility and interchangeability.

主要附件及配置

无