主要规格及技术指标

系统指标及参数：
1.工作电源：单相220V，50Hz
2.匀胶段数：10段匀胶段数可随意设置，前段匀胶完成可设置等待时间以满足用户旋涂厚胶需要静止的要求。
3.时间设定：0-200s，可根据分段匀胶自由设定（特殊设定时间可根据用户需求定制）
4.匀胶机速度范围：500-8000rpm可分十段自由设定。（备注：6寸片最大转速不超过6000rpm；8寸片最大转速不超过5000rpm）
5.匀胶均匀性：优于±2%
6.匀胶加速度时间：1.5s
7.电机功率:245W

System indicators and parameters：
1. Power supply: single-phase 220V, 50Hz.
2. Number of screeding segments: 10 segments of screeding segments can be set at will, before the completion of screeding can be set to wait for the completion of the time to meet the user spinning thick glue needs to be static requirements.
3. Time setting: 0-200s, can be set freely according to the section screed (special setting time can be customized according to the user's needs)
4. Screeder speed range: 500-8000rpm can be set freely in ten sections. (Remarks: the maximum speed of 6-inch piece does not exceed 6000rpm; the maximum speed of 8-inch piece does not exceed 5000rpm)
5. Uniformity: Better than ±2%.
6. Even glue acceleration time: 1.5s
7.Motor power:245W

主要功能及特色

RC-150/RC-200型匀胶机适用于半导体、硅片、晶片、基片、导电玻璃及制版等表面涂覆工艺，可在工矿企业、科研院校等单位作生产、科研、教学之用。RC-150/RC-200型匀胶机工作原理是在真空吸盘上高速旋转基片，利用离心力使滴在基片上的胶液均匀的涂在基片上，厚度视不同胶液和基片间的粘滞系数而不同，也和旋转速度及时间有关。
RC-150/RC-200 type screed machine is suitable for semiconductor, silicon, wafers, substrates, conductive glass and plate and other surface coating process, can be used in industrial and mining enterprises, scientific research institutions and other units for the production, scientific research, teaching purposes. RC-150/RC-200 type screed machine principle is to rotate the substrate at high speed in the vacuum suction cups, the use of centrifugal force to make drops of adhesive on the substrate uniformly coated on the substrate, thickness varies depending on the viscosity coefficient between different glue and the substrate, but also with the rotation speed and time. The thickness varies according to the viscosity coefficient between different glue and substrate, and also related to the rotating speed and time.

主要附件及配置

无