主要规格及技术指标

电气参数
1. 电机：台湾东炜庭TWT，90W，220V，50Hz
2. 减速机：台湾东炜庭TWT
3. 磁粉制动器：额定转矩6N·m，许用转速1500r/min；减速电机最高转速：500 RPM（短时间运行）
4.速度范围：0-500 RPM可调
5.数据采集机箱：8槽USB即插即用CompactDAQ机箱，可插放不同类型C模块
6.数据采集模块：六路数字输入通道，3路±30V振动采集通道，4路±5V振动采集通道

机械参数
1. 轴承：正常轴承2个，故障轴承需选配
2. 联轴器：1个孔径为1512mm，一个孔径为1212mm
3. 底板：铝合金

重量和尺寸
1. 转子实验台重量：约40kg
2. 转子实验台尺寸：620mm320mm220mm
3. 控制箱重量：约10kg
4. 控制箱尺寸：420mm450mm200mm


Electrical parameters
1. Motor: Taiwan TWT, 90W, 220V, 50Hz.
2. Decelerator: Taiwan TWT
3. magnetic powder brake: rated torque 6N-m, permissible speed 1500r/min
Maximum speed of gear motor: 500 RPM (short time operation)
4. Speed range: 0-500 RPM adjustable
5. Data acquisition chassis: 8-slot USB plug-and-play CompactDAQ chassis, which can be inserted and placed in different types of C modules.
6. Data acquisition module: six digital input channels, 3-way ± 30V vibration acquisition channel, 4-way ± 5V vibration acquisition channel

Mechanical parameters
1. Bearing: 2 normal bearings, faulty bearings need to be optional.
2. coupling: 1 hole diameter 1512mm, a hole diameter of 1212mm
3. base plate: aluminum alloy

Weight and size
1. weight of rotor test bench: about 40kg
2. Rotor test bench size: 620mm320mm220mm
3. control box weight: about 10kg
4. Control box size: 420mm450mm200mm

主要功能及特色

1. 模拟典型旋转机械设计
实验台借鉴风力发电机这一典型旋转机械的设计，包含小型转子台、变速电机、磁粉制动器、实验台控制器等组件。
2. 多样化传感器配置
配备多种工业现场常用的传感器，包括电涡流传感器、磁电式传感器、光电式传感器、霍尔传感器、编码器和振动传感器，满足不同实验需求。
3.实验台支持多种实验项目
包括：转速测量实验：使用磁电式、光电式、霍尔式、电感式传感器进行转速测量实验。振动测量实验：使用IEPE振动传感器进行振动测量实验。故障诊断实验：包括不对中故障诊断实验、轴承故障诊断实验和电机故障诊断实验。

1. Simulation of typical rotating machinery design
The design of the test bench is based on the typical rotating machinery design of wind turbine, including a small rotor table, variable speed motor, magnetic powder brake, test bench controller and other components.
2. Diversified sensor configuration
Equipped with a variety of industrial field commonly used sensors, including eddy current sensors, magnetoelectric sensors, photoelectric sensors, Hall sensors, encoders and vibration sensors, to meet different experimental needs.
3. The test bench supports a variety of experimental projects
Including: rotational speed measurement experiments: the use of magnetoelectric, photoelectric, Hall, inductive sensors for rotational speed measurement experiments. Vibration measurement experiment: use IEPE vibration sensor for vibration measurement experiment. Troubleshooting experiments: including misalignment troubleshooting experiments, bearing troubleshooting experiments and motor troubleshooting experiments.

主要附件及配置

无