主要规格及技术指标

1. 通道配置：标准单通道设计。
2. 注射器适配：兼容 10μL-150mL 塑料注射器，玻璃注射器适配型号（SPLab01-G1/G2）支持 250μL-100mL 规格。​
3. 电源：支持 AC 100-240V 宽电压输入（功率 65W）。
4. 流量范围：覆盖 1nL/min-165.871mL/min 超宽区间，其中微量级最低可达 0.002μL/min。​
5. 控制精度：行程＞30% 最大行程时，误差≤±0.3%（部分型号≤±0.5%），行程分辨率达 0.078μm / 微步。​
6. 线速度参数：线速度范围 1μm/min-132mm/min，调节分辨率 5μm/min，线性推力 8-25kgf 可在线调节，应对不同粘度液体的传输阻力。

Channel Configuration: Standard single-channel design.​
Syringe Compatibility: Compatible with 10μL-150mL plastic syringes; models adapted for glass syringes (SPLab01-G1/G2) support specifications ranging from 250μL to 100mL.​
Power Supply: Supports AC 100-240V wide-voltage input (power: 65W).​
Flow Rate Range: Covers an ultra-wide range of 1nL/min to 165.871mL/min, with the minimum micro-volume flow rate reaching 0.002μL/min.​
Control Precision: When the stroke exceeds 30% of the maximum stroke, the error is ≤±0.3% (≤±0.5% for some models); the stroke resolution is 0.078μm per micro-step.​
Linear Speed Parameters: Linear speed range is 1μm/min to 132mm/min, with an adjustment resolution of 5μm/min; the linear thrust (8-25kgf) can be adjusted online to cope with the transmission resistance of liquids with different viscosities.

主要功能及特色

1.共支持 6 种工作模式，覆盖实验全流程需求：​
基础模式：灌注（Infusion）、抽取（Withdrawal），满足单向液体传输；​
组合模式：先灌注后抽取、先抽取后灌注，适配样品混合、气泡排出等场景；​
连续模式：通过设置重复参数实现循环操作，无需人工干预；​
附加模式：针对特殊实验设计，如先灌后抽再排泡的一体化流程。​
2. 安全与辅助功能​
故障保护：推进机构堵塞时自动停机并报警，线性推力可根据液体粘度动态调节，避免设备过载或样品泄漏。​
参数管理：支持注射体积、流量、时间三种参数联动设置，可在运行中实时查看或修改参数，完成设定体积后自动停止。​
数据追溯：具备运行状态信号输出功能，可外接记录仪或上位机，实现实验过程数据的实时监控与追溯。

1. Supports 6 Operation Modes, Covering Full Experimental Process Requirements:​
Basic Modes: Infusion and Withdrawal, meeting the needs of one-way liquid transfer;​
Combination Modes: Infusion-then-Withdrawal and Withdrawal-then-Infusion, suitable for scenarios such as sample mixing and air bubble removal;​
Continuous Mode: Realizes cyclic operation by setting repeated parameters, no manual intervention required;​
Additional Mode: Designed for special experiments, e.g., integrated processes of infusion first, then withdrawal, and subsequent air bubble removal.​
2. Safety & Auxiliary Functions:​
Fault Protection: Automatically shuts down and alarms when the propulsion mechanism is blocked; linear thrust can be dynamically adjusted according to liquid viscosity to prevent equipment overload or sample leakage.​
Parameter Management: Supports linked setting of three parameters (injection volume, flow rate, and time); real-time viewing or modification of parameters during operation is available, and the pump automatically stops after reaching the set volume.​
Data Tracing: Equipped with an operation status signal output function, which can be connected to an external recorder or upper computer to realize real-time monitoring and tracing of experimental process data.

主要附件及配置

无