主要规格及技术指标

ASTM G65 磨损试验机性能参数
最大试验力 200N
示值精度 士1%
主轴转速调节范围 10r/min-200r/min
主轴转速精度 1r/min
温度测量范围 室温-200℃
试验转数 1-9999999 设定
标准块试样 12X2X30mm
标准试样(内径*外径*长度) ɸ222.5X12.7mm
输入电压 交流 220V
输入功率 2.2kW
供沙系统调节范围 10-500g/min

ASTM G65 Abrasion Tester Performance Parameters
Maximum Test Force 200N
Indicated Value Accuracy ±1%
Spindle Speed Adjustment Range 10 r/min–200 r/min
Spindle Speed Accuracy 1 r/min
Temperature Measurement Range Ambient–200°C
Test Rotations 1–9,999,999 (programmable)
Standard Block Specimen: 12 × 2 × 30 mm
Standard Specimen (ID × OD × Length): ɸ22 × 22.5 × 12.7 mm
Input Voltage: AC 220 V
Input Power: 2.2 kW
Sand Supply System Adjustment Range: 10–500 g/min


Translated with DeepL.com (free version)

主要功能及特色

ASTM G65 磨损试验机是采用滑动摩擦的形式，在一定的试验条件下用来评定工程塑料、粉末冶金、合金轴承等的使用性能。可在改变负荷、速度、时间、摩擦配偶材料、表面粗糙度、硬度等参数的各种情况下进行试验。用于测量磨损量以及 PV值，该试验机主要用于评价硬质合金在磨粒磨损条件下的耐磨性能试验机结构主要依据 ASTM G65-04 试验。
The ASTM G65 Wear Tester employs sliding friction to evaluate the service performance of engineering plastics, powder metallurgy products, alloy bearings, and similar materials under specified test conditions. Testing may be conducted under varying parameters including load, speed, duration, friction partner material, surface roughness, and hardness. Employed to measure wear volume and PV values, this tester is principally used to evaluate the wear resistance of cemented carbides under abrasive wear conditions. The tester's structure is primarily based on the ASTM G65-04 test method.

Translated with DeepL.com (free version)

主要附件及配置

无