主要规格及技术指标

1. 电源通道与输出范围
三路独立、隔离输出

通道 1 (CH1): 0 至 6 V，0 至 10 A | 0 to 6 V, 0 to 10 A
通道 2 (CH2): 0 至 25 V，0 至 2.5 A | 0 to 25 V, 0 to 2.5 A
通道 3 (CH3): 0 至 25 V，0 至 2.5 A | 0 to 25 V, 0 to 2.5 A

总输出功率： 160 W (所有通道合计)

2. 编程精度
电压设定精度： ±0.05% + 20 mV | ±0.05% + 20 mV
电流设定精度： ±0.1% + 4 mA | ±0.1% + 4 mA

3. 测量精度 (回读)
电压测量精度： ±0.05% + 20 mV | ±0.05% + 20 mV
电流测量精度： ±0.1% + 4 mA | ±0.1% + 4 mA

4. 纹波与噪声 (20 Hz 至 20 MHz)
电压 (p-p): < 3.5 mV (6V 档); < 6 mV (25V 档) | < 3.5 mV (6V range); < 6 mV (25V range)
电流 (rms): < 3.5 mA | < 3.5 mA

1. Power Channels & Output Ranges
Three Independent, Isolated Outputs
Channel 1 (CH1): 0 to 6 V, 0 to 10 A
Channel 2 (CH2): 0 to 25 V, 0 to 2.5 A
Channel 3 (CH3):0 to 25 V, 0 to 2.5 A
Total Output Power:160 W (combined for all channels)

2. Programming Accuracy
Voltage Setting Accuracy:±0.05% + 20 mV
Current Setting Accuracy: ±0.1% + 4 mA

3. Measurement Accuracy (Readback)
Voltage Measurement Accuracy: ±0.05% + 20 mV
Current Measurement Accuracy: ±0.1% + 4 mA

4. Ripple & Noise (20 Hz to 20 MHz)
Voltage (p-p): < 3.5 mV (6V range); < 6 mV (25V range)
Current (rms): < 3.5 mA

主要功能及特色

*三路独立隔离输出，灵活供电
*“3合1”设计：一台设备提供6V/10A和两路25V/2.5A输出，可同时为系统内不同电压等级的电路（如数字电路、模拟电路、运放等）供电，节省桌面空间。
*通道隔离：三个通道电气隔离，允许将输出串联（提高电压）或并联（提高电流），提供更灵活的供电方案。
*内置 6½ 位高精度数字万用表
*无需额外仪器：可直接在电源前面板或通过远程控制，以极高的精度（电压测量精度达±0.05% + 20 mV）测量负载的实际电压和电流。
*真正意义的“回读”：很多基础电源的“回读”只是显示设定值，而E36313A是真实测量，能准确反映连接线和负载上的真实压降及消耗电流，对精密设计至关重要。


*Three Independent and Isolated Outputs for Flexible Power Supply
*3-in-1 Design: One instrument provides one 6V/10A output and two 25V/2.5A outputs. It can simultaneously power circuits at different voltage levels (e.g., digital, analog, op-amps) within a system, saving valuable bench space.
*Channel Isolation: The three channels are electrically isolated, allowing users to connect outputs in series (to increase voltage) or in parallel (to increase current), offering more flexible power solutions.
* Built-in 6½ Digit High-Precision Digital Multimeter (DMM)
*No Additional Instrument Required: It can directly measure the actual voltage and current at the load with high precision (e.g., ±0.05% + 20 mV for voltage) either from the front panel or via remote control.
*True "Readback": Unlike many basic power supplies whose readback only displays the set value, the E36313A performs **real measurements**. This accurately reflects the true voltage drop across leads and the actual current consumption of the load, which is critical for precision design.

主要附件及配置

无