主要规格及技术指标

Mobile Phase: The solvent should be of HPLC-grade purity and needs to be filtered before use.
Pump: It is a binary pump with the model G1312C 1260Bin Pump VL. The flow rate setting range is 0 - 10 ml/min, and the pressure range is 0 - 200 bar.
Pressure Limit: The upper and lower pressure limits should be set reasonably. The upper pressure limit (Max) should not exceed the maximum pressure that the column and the instrument can withstand. Generally, it should be set about 20 bar higher than the normal analysis pressure. The lower pressure limit (Min) is usually set about 20 bar lower than the normal analysis pressure.
Autosampler: There are two sample trays, The model is G1329B 1260 ALS, with an injection volume setting range of 0 - 100 μL.
Column Oven: It is temperature-controllable within the range of 4 - 85℃.
流动相：溶剂应达到HPLC级纯度，并在使用前进行过滤。
泵：该泵为二元泵，型号为G1312C 1260Bin Pump VL。其流速设定范围为0 - 10 ml/min，压力范围为0 - 200 bar。
压力限制：应合理设置上限和下限压力。上限压力（Max）不得超过色谱柱和仪器所能承受的最大压力。通常，应将其设置为比正常分析压力高出约20 bar。下限压力（Min）通常设置为比正常分析压力低约20 bar。
自动进样器：配备有两个样品托盘，型号为G1329B 1260 ALS，进样体积设定范围为0 - 100 μL。
柱温箱：温度可在4 - 85℃范围内进行控制。

主要功能及特色

Ultra-low residue; shorten cycle time;
Efficient sample handling and procedures;
Efficient column operation and temperature control; higher quality data;
Efficient analysis of complex components
超低的残留 ； 缩短循环时间；
高效的样品处理和流程；
高效的色谱柱操作和温度控制； 更高质量的数据；
高效的分析复杂组分
Solvent System: Supports a variety of solvents, offering high flexibility for various research and routine applications
溶剂系统：支持多种溶剂，具有极高灵活性，适用于各种研究和常规应用
System Stability: Pulse-free, stable, and uniformly mixed gradients ensure higher sensitivity and more reliable results
系统稳定性：无脉冲、稳定而混合均匀的梯度可确保获得更高的灵敏度和更可靠的结果
Data Acquisition & Processing: Equipped with advanced data acquisition and processing software, enabling automated control and data analysis
数据采集与处理：配备先进的数据采集与处理软件，可实现自动化控制和数据分析

主要附件及配置

Detectors: There are two detectors. One is a diode array detector with the model 1260DAD VL G1315D. The other is a refractive index detector with the model RID G1362A. This detector can only be used for isocratic elution. It is recommended to set the detector temperature at least 5°C higher than the room temperature.

检测器：配备有两个检测器。一个是二极管阵列检测器，型号为1260DAD VL G1315D。另一个是示差检测器，型号为RID G1362A。该折射率检测器仅适用于等度洗脱。建议将检测器温度设置为至少比室温高5°C。